KSD9700 temperature control switch 250V5A normally closed / normally open 15 °C ~ 155 °C thermal protection

Normally closed: the temperature control switch is in the working state (the circuit is connected), and the temperature exceeds the temperature control temperature and trips (disconnects) and does not work

Such as electric kettle
Normally open: the temperature is not exceeded, it is an open circuit (not working), and it starts to work when the temperature is exceeded (the circuit is turned on)

Switch type: normally open / normally closed
Material: composite silver contact plastic shell / metal iron shell
Product specifications: conventional type 20mm*8mm*4mm
Rated voltage: 0-250V AC and DC universal
Overload current: within 5A
Life: 100,000 times

 

  Reset temperature description:
When the operating temperature is below 75℃, the reset temperature is the operating temperature minus 20℃±10℃
When the action temperature is between 75℃~100℃, the reset temperature is the action temperature minus 30℃±10℃
When the operating temperature is above 100℃, the reset temperature is the operating temperature minus 40℃±10℃

Rated voltage: AC250V/AC125V;

Rated current: within 5A

Normal electric strength: ﹥800 V

Normal contact resistance: <50 milliohms

Insulation resistance: ﹥100 milliohms

Response speed: ≦1℃/mic

Precautions:

1. Do not deform or collapse the shell during installation!

2. This product is not suitable for temperature sensing in the air, only suitable for contact temperature sensing!

    (It can be fixed with cable tie, iron wire, fixing seat or 704 silicone rubber, etc.)

3. The metal case is charged and it is not suitable for working in water.

    When the plastic shell is put into water to work, the insulating sealant should not be immersed.

4. When the product is installed, the temperature control switch should be close to the installation surface of the controlled appliance.