KST-207 Compact Adjustable thermostat, used for KTO & KTS thermostat
- PRODUCT DETAIL
The KST thermostat is a mechanical thermostat, and its commissioning steps are the same as those of a mechanical thermostat. The specific operation method is as follows:
I. First confirm the angle sample. See where the sample angle is today.
II. Pick up the KST thermostat, and first check whether the switch is tight, stuck, whether the white point has come off, and whether there is sound when the thermostat contacts come in contact. If there is no sound, there should be two possibilities:
1. The angle of the thermostat is too low.
2. The temperature controller angle is too high. If there is no such phenomenon, you can listen (or see) whether the angle of the thermostat meets the requirements of the sample.
III. pay attention: When holding the KST thermostat, do not touch the bimetal. Because the KST thermostat transmits the temperature by the bimetal. If your hand touches a bimetal. Hand temperature changes its angle.
Baby warmer temperature plug switch Technical Parameters:
1. Electrical parameters: 16A 250V ~; 20A 125V ~;
2. Operating temperature range: 0 ℃ ~ 250 ℃ optional;
3. Electrical strength: 2000V ~ 1min no breakdown, reliable product action altogether, do not pull the arc, long life, low radio interference, temperature control accurate;
4. Contact resistance: ≤50mΩ;
5. Insulation resistance: ≥5MΩ;
6. Leakage current: ≤0.25mA;
7. Rotary axis: torque 1.5N · m or more, the initial value of the test temperature within ± 1 ℃;
7. Life: 100,000 cycles;
8. Thermostat axis rotation angle: 0 ° to 310 ° optional;
9. Terminals: according to the actual needs of the customer ac households have 0.8 and 6.3 * 4.8 * 0.8, etc. in line with the national standard selection of terminals.
10. The UL.CUL, VDE, CE, TUV, CEMC, ROHS certification
I. First confirm the angle sample. See where the sample angle is today.
II. Pick up the KST thermostat, and first check whether the switch is tight, stuck, whether the white point has come off, and whether there is sound when the thermostat contacts come in contact. If there is no sound, there should be two possibilities:
1. The angle of the thermostat is too low.
2. The temperature controller angle is too high. If there is no such phenomenon, you can listen (or see) whether the angle of the thermostat meets the requirements of the sample.
III. pay attention: When holding the KST thermostat, do not touch the bimetal. Because the KST thermostat transmits the temperature by the bimetal. If your hand touches a bimetal. Hand temperature changes its angle.
IV. If the angle is not correct, turn the temperature control switch to adjust the angle to the range we need. Fix the thermostat switch with your thumb and index finger, and then debug from the switch hole. The debugging operation can be stopped when the temperature controller is closed.
V. After commissioning, turn the KST thermostat switch to confirm that it meets the sample requirements.
VI. After confirming that it is qualified, return the KST thermostat switch to its original position and carefully place it in the dedicated thermostat foam board.
V. After commissioning, turn the KST thermostat switch to confirm that it meets the sample requirements.
VI. After confirming that it is qualified, return the KST thermostat switch to its original position and carefully place it in the dedicated thermostat foam board.
Baby warmer temperature plug switch Technical Parameters:
1. Electrical parameters: 16A 250V ~; 20A 125V ~;
2. Operating temperature range: 0 ℃ ~ 250 ℃ optional;
3. Electrical strength: 2000V ~ 1min no breakdown, reliable product action altogether, do not pull the arc, long life, low radio interference, temperature control accurate;
4. Contact resistance: ≤50mΩ;
5. Insulation resistance: ≥5MΩ;
6. Leakage current: ≤0.25mA;
7. Rotary axis: torque 1.5N · m or more, the initial value of the test temperature within ± 1 ℃;
7. Life: 100,000 cycles;
8. Thermostat axis rotation angle: 0 ° to 310 ° optional;
9. Terminals: according to the actual needs of the customer ac households have 0.8 and 6.3 * 4.8 * 0.8, etc. in line with the national standard selection of terminals.
10. The UL.CUL, VDE, CE, TUV, CEMC, ROHS certification
PREV：Method for judging the quality of electric iron thermostat
NEXT：Adjustable Electric oven Mechanical temperature controlled plug Switch
NEXT：Adjustable Electric oven Mechanical temperature controlled plug Switch
