China Thermal Protector Manufacturer

China Micro Thermal Switches & thermostat manufacturer

thermal protection

Product Item: thermal protection
Category: Bimetal Switch
Thermal protector is a combination of two different alloys, which will generate heat after passing current. Due to the different thermal expansion coefficients of the two different alloys, the alloy is bound to bend in one direction, and the contacts leave, and the electricity is cut off. The bending speed is directly proportional to the amount of current passing through it. This protects the electrical equipment.

  • PRODUCT DETAIL
Thermal protector is a combination of two different alloys, which will generate heat after passing current. Due to the different thermal expansion coefficients of the two different alloys, the alloy is bound to bend in one direction, and the contacts leave, and the electricity is cut off. The bending speed is directly proportional to the amount of current passing through it. This protects the electrical equipment.

Thermal protectors can be called temperature-controlled switches.
General requirements
The thermal protector is integrated with the motor structurally and functionally to form a thermal dynamic system. The motor as a heater affects the heating and cooling rate of the protector. The reliability and performance of the thermal protector should be tested by installing the protector in the motor.
The requirements of this standard apply to a single motor or a series of motors and a thermal protector.
When using a thermal protector, you must first determine whether the thermal protector is self-resetting or non-self-resetting. Generally speaking, unless accidental restart of the motor may cause danger or injury to the user, a self-resetting thermal protector can be used. Examples of applications that require non-self-resetting protectors are: Fuel motor, waste food processor, conveyor belt, etc.
Examples of applications requiring self-resetting thermal protectors are refrigerators, electric washing machines, electric clothes dryers, fans, pumps, etc.


The company produces mainly KSD series thermostat sudden jump bimetallic thermostat. Especially in high-power thermostat for the leading products in this area we have a wealth of experience and strong R & D capabilities. The company's production of temperature control performance, high precision temperature control, carrying current, the product of good synchronization. Key raw materials from abroad, with Emerson's comparable products. Now is the one obtained only through the 60A current CE, TUV, UL, CUL and CQC safety certification. The company produces thermostat varieties, current from 5A-60A, Voltage from 110V-400V. Existing home but also for industrial use.

thermal protection technical parameters: AC250V, 400V 15A-60A
Temperature range: -20 ℃ -180 ℃
Reset Type: Manual reset
Safety Certification: TUV CQC UL CUL S ETL

●thermal protection performance and principle
KSD302 series thermostat is a bimetal strip housing fully enclosed contact temperature temperature relay. according to the principle of thermal expansion and contraction of the metal sheet is bent off after reaching the set temperature, the temperature drops to the set temperature can be automatically connected pass, play on electrical safety protection.
● widely used:
welding machines, washing machines, air conditioners, refrigerators, thermostats sanitary ware, electric hot water bottle, electric kettles, electric heaters, electric ovens, water heaters, drinking fountains, microwave ovens, disinfection cabinets, electric pressure cookers, rice cookers temperature control and other industrial and home appliance products.


● thermal protection Product Specifications
⑴ Function: temperature protection and thermal protection, anti-dry
⑵ Electrical Characteristics: AC250V / 15A ~ 30A ~ 40A ~ 50A ~ 60A
⑶ Maximum ambient temperature: 180 ℃
⑷ Operating temperature range: 0 ℃ ~ 180 ℃ (optional). Temperature tolerance: ± 5
⑸ normal insulation resistance:> 100MΩ
⑹ normal contact resistance: ≤100mΩ
⑺ life:> 10,000 or more
● thermal protection Product Precautions
⑴ When using a contact temperature installation should be closely aligns the charged surface of the metal lid of the appliance mounting surface.
⑵ When installing the cap can not face pressure deformation, so as not to affect the performance.
⑶ To prevent leakage, can not allow the use of liquid into the interior temperature, so as not to affect the electrical reliability.
⑷ This product is a bipolar wiring, when used according to label symbols, correct wiring.
⑸ product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilated, clean, dry, non-corrosive gases stored in the warehouse.


bimetal thermal protector



PREV:Thermal Cutoff Switch
NEXT:Thermal Switches Bimetal



Skype

WhatsApp

WangWang

QQ
Email me

Mail to us