Welcome to China Electronic protection components official website!

youtube | twitter | instagram | google | vk | pinterest | Site Map|中文版
Support Hotline
0769-83811196
Overheat, Overcurrent Protection Element Small Batch Manufacturing
Home > News > Industry News >

Digital Temperature Sensor_model_Parameter & selection

Article Source:sensor manufacturersAuthor:Yaxun ElectronicsPopularity:Published time:2017-12-16 11:41

Digital Temperature Sensors
Digital Temperature Sensors
Selectable temperature resolutions and conversion rates, multiple critical temperature limits, fault-tolerance queuing, selectable hysteresis thresholds to account for minor temperature variances near the programmed temperature limits, and non-volatile configuration and temperature registers to retain settings even when ...

MAX31826 1-Wire Digital Temperature Sensor with 1Kb Lockable ...
The MAX31826 digital thermometer provides 12-bit temperature measurements and communicates over a 1-Wire® bus that by definition requires only one data line (and ground) for communication with a central microcontroller. It has a -55°C to +125°C operat.

LM75 Digital Temperature Sensor and Thermal Watchdog with 2-Wire ...
LM75 Digital Temperature Sensor and Thermal Watchdog with 2-Wire ...
The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector. The host can query the LM75 through its I²C interface to read temperature at any time. The open-drain overtemperature output (OS) s.

[PDF]DS18B20 Programmable Resolution 1-Wire Digital Thermometer
The core functionality of the DS18B20 is its direct-to- digital temperature sensor. The resolution of the tempera- ture sensor is user-configurable to 9, 10, 11, or 12 bits, corresponding to increments of 0.5°C, 0.25°C, 0.125°C, and 0.0625°C, respectively. The default resolution at power-up is 12-bit. The DS18B20 powers up in ...

Si705x Digital Temperature Sensors with I²C Interface | Silicon Labs
Si705x Digital Temperature Sensors with I²C Interface | Silicon Labs
The Si705x Digital Temperature Sensors offer industry-leading low power consumption and high accuracy across the entire operating voltage and temperature range.

Selecting the right digital temperature sensor for your application | EDN
This article explores the broad categories of local and remote digital temperature sensors, examines specific technologies used within these...

Digital Temperature Sensors - Maxim | Mouser
Digital Temperature Sensors - Maxim | Mouser
Maxim Digital Temperature Sensors are available at Mouser and part of a very wide range of temperature sensing and control applications in the world.

bimetal thermostat
Bimetal Thermostat
Bimetal thermostat for electrical and automotive equipment overheating protection, bimetal thermostat models referred to as KSD, common such as KSD301, KSD302, KST, etc., Usually used in series with the thermal fuse. Our thermostats comply with CCC, CQC, ce, UL, ROHS, TUV, VDE, RU, pse, FCC, IEC and CB standards ... including: automatic reset, manual reset, normally open, normally closed , Adjustable type, unipolar, bipolar thermostat and etc.

Liquid Expansion Thermostat
Liquid Expansion Thermostat

When the temperature of the heating element changes, the temperature inside the temperature control part of the material (usually liquid) to produce the corresponding thermal expansion and contraction of the physical phenomenon, and the film cartridge connected to the temperature sensing portion is expanded or contracted. Use the lever principle to generate a switch on / off action. Stable and reliable, open the temperature difference is small, control the temperature control range, overload current and other performance characteristics. Liquid thermostat is mainly used for home appliances industry, electric equipment, refrigeration and other temperature control occasions.We thermostat in line with CCC, CQC, ce, UL, ROHS, TUV, IEC and CB standards ...... include: automatic reset, manual reset.
fuse
Fuse
The fuse (FUSE) is overcurrent, overheat protection element, IEC127 standard it is defined as "the fuse link (fuse-link)". Its main role is to overload protection. The correct placement of the circuit fuse, the fuse will be in the current abnormally elevated to a certain height and heat of the moment, its own fuse cut off the current to protect the safe operation of the circuit. Fuses need to pass the CCC, CQC, ce, UL, ROHS, TUV, VDE, RU, pse, FCC, IEC and CB standards ...Including: current fuse, resettable fuse, Thermal fuse and car fuses ... ... and etc.

temperature sensor
Temperature Sensor

Temperature sensing is a different sensing resistor chip package inside the probe, commonly used temperature sensitive components are: thermocouple, platinum resistance, thermistor and so on. Temperature sensing customers in the design and styling, we need to select sensitive chip used, the probe dimensions and material, type and temperature of the wire. After the chip welding wire, After the probe is filled and encapsulated, a complete sensor device is formed, and the production process takes several hours. My products through: SJ 20722-1998, GJB 7396-2011, GJB 2433A-2011, ISO / TS16949: 2009 certification. ......Including: ntc temperature sensor, ptc temperature sensor, Pt100 temperature sensor, water temperature sensor, car sensor, ds18b20 sensor.


Thermistor
Thermistor
Thermistors are a class of sensitive components, divided into positive temperature coefficient thermistor (PTC) and negative temperature coefficient thermistor (NTC) according to temperature coefficient. Typical characteristics of the thermistor are temperature sensitive and exhibit different resistance values at different temperatures. Our thermistors accord: JB / T9476-1999, JB / T 9474-1999 standard ...... include: ntc, ptc, SMD thermistors, thermistor power type, resettable fuse, Motor protection thermistor, etc.