Welcome to China Electronic protection components official website!

youtube | twitter | instagram | google | vk | pinterest | Site Map|中文版
Support Hotline

98 Overload protection_ overload device

Category: Overload protection
Product Introduction:Overload protection
Order Hotline:0769-83811196
    Overload protection by sensing temperature and current to protect the compressor. Overload is basically composed of a normally closed contact and bimetallic element. Overload protection is assembled outside of the compressor, and direct contact with the compressor housing and compressor windings connected in series. If the compressor does not start for some reason, the overload stall current will cause rapid heat the bimetal element bent, cause rapid jump, cut off the current flowing through the compressor to protect the compressor. Similarly, if the compressor motor winding temperature compressor cause abnormal heat is too high, the protector will heat and jump, so as to protect the compressor. As long as the cause of the malfunction does not exclude, in the case of compressor overload, again and again with the action of the bimetal element and open stop.
    Use ohmmeter for testing
    1. If the overload protection device is disconnected, then let it cool to room temperature (closed) continue to measure.
    2. Although capable of continuous observation of work overload, however, to confirm that the parts are there hard work according to specifications.
    3. If you are not sure whether there is a problem overload, replace parts of the same

    Motor overload protection device 88 series breakers UL / TUV / CE / CSA certific


    Rated Current : 0.5A~30A
    Rated Voltage : 125/250VAC 50VDC 50~60Hz
    Open Capacity: 1,000A×125VAC
    Hi-pot Test: 1,500V/min
    Overload current : 10 times of rated current
    Min voltage: less than 0.25V
    Reset time : in 60 seconds
    Insulation resistance : more than 500VDC × 100MΩ
    Terminal temp : 100 % test under 25°C
    temperature rise less than 25°C
    Life test: 125VAC × 150 % current, over 500 cycles.
    Test standard(25°C) of this circuit breaker:
    100% rated current: No trip Off
    150% rated current: trip off in 1 hour
    200% rated current: trip off in 40 minutes
    300% rated current: trip off in 10 seconds

    Product Certification: UL / TUV / CE / CB / RoHS

    overload protection circuit
    overload protection circuit


    ►R & D, production and sales. Protection of electronic components industry standard setters. Rich experience in production technology, 100% pass rate. All products through international quality certification standards, 63 patent certificates.
    Strong Production Capacity
    ►The introduction of top international production, testing equipment, leading R & D manufacturing process; Multiple rigorous safety testing processes, Annual production capacity of 1 billion, Sales and service network all over the world.
    Professional Technical Support
    ►Our company provides free samples to test. Unconditional 100% quality assurance; One on one to provide you with protection element solutions, Tailored for you.
    Distinguished Quality Service
    ►We have a professional management team and sales network;Service up to more than 10,000 users worldwide;Homegrown, no middleman, Saves you 20% of the product price.

    Dongguan Yaxun Electronic Hardware Product Co., Ltd.

    Address:Dongguan changping town bridge industrial zone 15 well




    * Said requiredOrder:98 Overload protection_ overload device
    * Contact: Actual Name
    * Phone: Contact Number
    * Description:
    Please fill outordernumber of products and product description.
    Captcha: Can't see? Click on the change
    Contact Yaxun
    Support Hotline:0769-83811196


    Address:Changping Town, Dongguan City Industrial Park Bridge Lek 15